LP2 Ridge Vent
$0.00
Marco’s premier custom-cut vent strip includes polyester vent material inserts for a snug fit and optimum ventilation at a cost lower than traditional fans and louvers. Made with recycled materials, it features a 40-year limited warranty and Marco’s proprietary adhesive for a superior hold. Marco’s patented LP2 offers superior Net Free ventilation that reduces condensation and helps lower utility costs.
Description
Marco’s patented LP2 Ridge Vent is made from non-fabric-covered vent material. This durable, modified polyester is a nonwoven, non-wicking, fiber-based matting. Its specially cut contours provide a custom, low-profile fit for any pitch and most major metal roof profiles. LP2 provides a superior Net Free ventilation area that helps keep out moisture, pests, and dust. Plus, LP2 can be installed by just one person in three easy steps. In fact, the screw bed and industrial strength peel-and-stick adhesive pre-applied to LP2 make this one of the easiest installations imaginable.
How To Install:
LP2 comes in three-foot sections. With LP2’s double bead of industrial strength adhesive, one person can simply remove the peel-and-stick strips to apply LP2 to the metal roof, then secure the ridge cap over the LP2 with fasteners or nails. It’s that easy!
Specs:
et-Free Area: Varies with profile based on 17 square inches per linear foot of ventilation material
Dimensions: Varies with profile
Air Permeability: >760 cubic feet per minute
Cold Cracking: -25ºF
Tear & Tensile Strength: Machine 25 ppi / Counter 25 ppi
Compressive Strength: 1.8 psi at 75%
Rain: No Leakage
Closure Material
Nominal Density-Skin/Skin (BS ISO 7214 1998): 24 kg/m3
Compression Stress-Strain (BS ISO 7214 1998)
10% compression: 34 kPa
25% compression: 53 kPa
40% compression: 85 kPa
50% compression: 118 kPa
Shore Hardness 00 Scale, 10 mm cell/cell thickness (ISO 868 1985): 50 00
Thermal Conductivity — Mean Temp of 10° C (ISO 8302 1991): 0.0392 W/m.K
Flammability — Automotive (FMVSS.302-Burn Rate): Pass 12 mm & thicker <100mm/min
Flammability — Horizontal Burn Rate (ISO 7214 1998): 5 mm thick, 2.1 mm/sec and 13 mm thick, 1.5 mm/sec
Material
Net-Free Area: Varies with profile based on 17 square inches per linear foot of ventilation material
Dimensions: Varies with profile
Cold Cracking: -25ºF
Compressive Strength: 1.8 psi at 75%
Rain: No Leakage
Air Permeability: (ASTM D737) 760 cubic feet per minute
Tear & Tensile Strength: (Tear: ASTM D1294·86, Tensile: ASTM D2261·83) Machine 25 ppi / Counter 25 ppi
Self-Ignition Temperature: (ASTM D1929) 963° F
Related products
-
Profile Ridge Vent
$0.00 Select options This product has multiple variants. The options may be chosen on the product page -
Solid Foam Closure ( Die Cut To Profile )
$0.00 Select options This product has multiple variants. The options may be chosen on the product page -
Universal Foam Closure
$0.00 Select options This product has multiple variants. The options may be chosen on the product page -
X-Seal Expanding Foam
$0.00 Select options This product has multiple variants. The options may be chosen on the product page